Geben Sie ein Wort oder eine Phrase in einer beliebigen Sprache ein 👆
Sprache:
Übersetzung und Analyse von Wörtern durch künstliche Intelligenz ChatGPT
Auf dieser Seite erhalten Sie eine detaillierte Analyse eines Wortes oder einer Phrase mithilfe der besten heute verfügbaren Technologie der künstlichen Intelligenz:
- wie das Wort verwendet wird
- Häufigkeit der Nutzung
- es wird häufiger in mündlicher oder schriftlicher Rede verwendet
- Wortübersetzungsoptionen
- Anwendungsbeispiele (mehrere Phrasen mit Übersetzung)
- Etymologie
Was (wer) ist Data Terminal Ready - definition
Data Terminal Ready
CONTROL SIGNAL IN RS-232 SERIAL COMMUNICATIONS
Data terminal ready
<communications> (DTR) The wire in a full RS-232 connection
that tells the Data Communication Equipment (DCE, typically
a modem) that the Data Terminal Equipment (DTE, typically
a computer or terminal) is ready to transmit and receive
data.
(2000-04-05)
Data Terminal Ready
CONTROL SIGNAL IN RS-232 SERIAL COMMUNICATIONS
Data terminal ready
Data Terminal Ready (DTR) is a control signal in RS-232 serial communications, transmitted from data terminal equipment (DTE), such as a computer, to data communications equipment (DCE), for example a modem, to indicate that the terminal is ready for communications and the modem may initiate a communications channel.
Data Terminal Equipment
COMMUNICATIONS SYSTEM EQUIPMENT
Data Terminal Equipment; Data terminating equipment; Datenendeinrichtung; DTE (telecommunication); DEE (telecommunication)
<communications, hardware> (DTE) A device which acts as the
source and/or destination of data and which controls the
communication channel. DTE includes terminals, computers,
protocol converters, and multiplexors.
DTE is usually connected via an EIA-232 serial line to
Data Communication Equipment (DCE), typically a modem. It
is necessary to distinguish these two types of device because
their connectors must be wired differently if a
"straight-through" cable (pin 1 to pin 1, pin 2 to pin 2 etc.)
is to be used. DTE should have a male connector and should
transmit on pin three and receive on pin two. It is a curious
fact that many modems are actually "DTE" according to the
original standard.
(1995-02-28)
Wikipedia
Data Terminal Ready
Data Terminal Ready (DTR) is a control signal in RS-232 serial communications, transmitted from data terminal equipment (DTE), such as a computer, to data communications equipment (DCE), for example a modem, to indicate that the terminal is ready for communications and the modem may initiate a communications channel.
