Übersetzung und Analyse von Wörtern durch künstliche Intelligenz ChatGPT
Auf dieser Seite erhalten Sie eine detaillierte Analyse eines Wortes oder einer Phrase mithilfe der besten heute verfügbaren Technologie der künstlichen Intelligenz:
- wie das Wort verwendet wird
- Häufigkeit der Nutzung
- es wird häufiger in mündlicher oder schriftlicher Rede verwendet
- Wortübersetzungsoptionen
- Anwendungsbeispiele (mehrere Phrasen mit Übersetzung)
- Etymologie
Was (wer) ist SCANNED - definition
, Fig. 1a.png?width=200 "(a)")
, Fig. 1b.png?width=200 "(b)")
, Fig. 1a and 1b.png?width=200 "(a)")
, Fig. 1c.png?width=200 "(c)")
, Fig. 1d.png?width=200 "(d)")
, Fig. 1e.png?width=200 "(e)")
![superpose]]) in front of the antenna to create a [[plane wave]], a beam of radio waves travelling in a specific direction θ. The phase shifters delay the radio waves progressively going up the line so each antenna emits its wavefront later than the one below it. This causes the resulting plane wave to be directed at an angle θ to the antenna. The computer can alter the phase shifters to steer the beam to a new direction, very quickly. The velocity of the radio waves is shown slowed down enormously.](https://commons.wikimedia.org/wiki/Special:FilePath/Phased array animation with arrow 10frames 371x400px 100ms.gif?width=200 "superpose]]) in front of the antenna to create a [[plane wave]], a beam of radio waves travelling in a specific direction θ. The phase shifters delay the radio waves progressively going up the line so each antenna emits its wavefront later than the one below it. This causes the resulting plane wave to be directed at an angle θ to the antenna. The computer can alter the phase shifters to steer the beam to a new direction, very quickly. The velocity of the radio waves is shown slowed down enormously.")
Wikipedia
Counter-scanning (CS) is a scanning method that allows correcting raster distortions caused by drift of the probe of scanning microscope relative to the measured surface. During counter-scanning two surface scans, viz., direct scan and counter scan are obtained (see Fig. 1). The counter scan starts in the point where the direct scan ends. This point is called the coincidence point (CP). With the counter scan, the probe movement along the raster line and the probe movement from one raster line to the other raster line are carried out along the directions that are opposite to the movements in the direct scan. The obtained pair of images is called counter-scanned images (CSIs).
