Übersetzung und Analyse von Wörtern durch künstliche Intelligenz ChatGPT
Auf dieser Seite erhalten Sie eine detaillierte Analyse eines Wortes oder einer Phrase mithilfe der besten heute verfügbaren Technologie der künstlichen Intelligenz:
- wie das Wort verwendet wird
- Häufigkeit der Nutzung
- es wird häufiger in mündlicher oder schriftlicher Rede verwendet
- Wortübersetzungsoptionen
- Anwendungsbeispiele (mehrere Phrasen mit Übersetzung)
- Etymologie
splice clip - Übersetzung nach russisch
![Stages in splicing the end of a rope, from ''[[Scientific American]]'', 1871](https://commons.wikimedia.org/wiki/Special:FilePath/1871 illustration rope splices.png?width=200 "Stages in splicing the end of a rope, from ''[[Scientific American]]'', 1871")
строительное дело
зажим (зажимная муфта) для стыкования арматурных стержней
![An [[M1 Garand]] ''en bloc'' clip (left) compared to an [[SKS]] stripper clip (right)](https://commons.wikimedia.org/wiki/Special:FilePath/Clip M1-SKS.JPG?width=200 "An [[M1 Garand]] ''en bloc'' clip (left) compared to an [[SKS]] stripper clip (right)")
![Loading a [[7.92×57mm Mauser]] [[Karabiner 98k]] rifle with a five-round stripper clip.](https://commons.wikimedia.org/wiki/Special:FilePath/K98kclip.jpg?width=200 "Loading a [[7.92×57mm Mauser]] [[Karabiner 98k]] rifle with a five-round stripper clip.")
![Steyr M95]] carbine.](https://commons.wikimedia.org/wiki/Special:FilePath/M95enbloc.jpg?width=200 "Steyr M95]] carbine.")
![M1917]] revolvers. The [[.45 Auto Rim]] cartridge may be used in a revolver's cylinders without the clips.](https://commons.wikimedia.org/wiki/Special:FilePath/Moonclips.jpg?width=200 "M1917]] revolvers. The [[.45 Auto Rim]] cartridge may be used in a revolver's cylinders without the clips.")
Wikipedia
Rope splicing in ropework is the forming of a semi-permanent joint between two ropes or two parts of the same rope by partly untwisting and then interweaving their strands. Splices can be used to form a stopper at the end of a line, to form a loop or an eye in a rope, or for joining two ropes together. Splices are preferred to knotted rope, since while a knot typically reduces the strength by 20–40%, a splice is capable of attaining a rope's full strength. However, splicing usually results in a thickening of the line and, if subsequently removed, leaves a distortion of the rope. Most types of splices are used on 3-strand rope, but some can be done on 12-strand or greater single-braided rope, as well as most double braids.
While a spliced 3-strand rope's strands are interwoven to create the splice, a braided rope's splice is constructed by simply pulling the rope into its jacket.
