turning - ορισμός. Τι είναι το turning
Diclib.com
Λεξικό ChatGPT
Εισάγετε μια λέξη ή φράση σε οποιαδήποτε γλώσσα 👆
Γλώσσα:

Μετάφραση και ανάλυση λέξεων από την τεχνητή νοημοσύνη ChatGPT

Σε αυτήν τη σελίδα μπορείτε να λάβετε μια λεπτομερή ανάλυση μιας λέξης ή μιας φράσης, η οποία δημιουργήθηκε χρησιμοποιώντας το ChatGPT, την καλύτερη τεχνολογία τεχνητής νοημοσύνης μέχρι σήμερα:

  • πώς χρησιμοποιείται η λέξη
  • συχνότητα χρήσης
  • χρησιμοποιείται πιο συχνά στον προφορικό ή γραπτό λόγο
  • επιλογές μετάφρασης λέξεων
  • παραδείγματα χρήσης (πολλές φράσεις με μετάφραση)
  • ετυμολογία

Τι (ποιος) είναι turning - ορισμός

MACHINING PROCESS IN WHICH THE WORKPIECE ROTATES AROUND ITS OWN AXIS WHILE A CUTTING TOOL IS MOVED MACHINE-GUIDED ALONG THE CONTOUR TO BE GENERATED
CNC Turning; Hard turning
  • upright=0.5
  • upright=0.5
  • upright=0.5
  • upright=0.5
  • upright=0.5
  • upright=0.5
  • Finish turning
  • Roughing, or rough turning
  • Parting aluminium

Turning         
·noun Deviation from the way or proper course.
II. Turning ·p.pr. & ·vb.n. of Turn.
III. Turning ·noun A maneuver by which an enemy or a position is turned.
IV. Turning ·noun The place of a turn; an angle or corner, as of a road.
V. Turning ·noun The pieces, or chips, detached in the process of turning from the material turned.
VI. Turning ·noun Turnery, or the shaping of solid substances into various by means of a lathe and cutting tools.
VII. Turning ·noun The act of one who, or that which, turns; also, a winding; a bending course; a fiexure; a meander.
turning         
¦ noun
1. a place where a road branches off another.
2. the action or skill of using a lathe.
(turnings) shavings of wood resulting from turning wood on a lathe.
turning         
(turnings)
If you take a particular turning, you go along a road which leads away from the side of another road.
Take the next turning on the right.
= turn
N-COUNT
see also turn

Βικιπαίδεια

Turning

Turning is a machining process in which a cutting tool, typically a non-rotary tool bit, describes a helix toolpath by moving more or less linearly while the workpiece rotates.

Usually the term "turning" is reserved for the generation of external surfaces by this cutting action, whereas this same essential cutting action when applied to internal surfaces (holes, of one kind or another) is called "boring". Thus the phrase "turning and boring" categorizes the larger family of processes known as lathing. The cutting of faces on the workpiece, whether with a turning or boring tool, is called "facing", and may be lumped into either category as a subset.

Turning can be done manually, in a traditional form of lathe, which frequently requires continuous supervision by the operator, or by using an automated lathe which does not. Today the most common type of such automation is computer numerical control, better known as CNC. (CNC is also commonly used with many other types of machining besides turning.)

When turning, the workpiece (a piece of relatively rigid material such as wood, metal, plastic, or stone) is rotated and a cutting tool is traversed along 1, 2, or 3 axes of motion to produce precise diameters and depths. Turning can be either on the outside of the cylinder or on the inside (also known as boring) to produce tubular components to various geometries. Although now quite rare, early lathes could even be used to produce complex geometric figures, even the platonic solids; although since the advent of CNC it has become unusual to use non-computerized toolpath control for this purpose.

The turning processes are typically carried out on a lathe, considered to be the oldest of machine tools, and can be of different types such as straight turning, taper turning, profiling or external grooving. Those types of turning processes can produce various shapes of materials such as straight, conical, curved, or grooved workpieces. In general, turning uses simple single-point cutting tools. Each group of workpiece materials has an optimum set of tool angles that have been developed through the years.

The bits of waste metal from turning operations are known as chips (North America), or swarf (Britain). In some areas they may be known as turnings.

The tool's axes of movement may be literally a straight line, or they may be along some set of curves or angles, but they are essentially linear (in the non mathematical sense).

A component that is subject to turning operations can be termed as a “Turned Part” or “Machined Component”. Turning operations are carried out on a lathe machine which can be manually or CNC operated.

Παραδείγματα από το σώμα κειμένου για turning
1. "His mind was turning, turning, turning – always turning.
2. "I saw them turning and firing in this direction, then turning and firing in that direction.
3. Turning point Even if last week‘s adjustment was timid, it could mark an important turning point.
4. "Turning Microsoft in 2005 is going to be much harder than turning them in 1''5.
5. "The sign prevents drivers turning right against very busy oncoming traffic into a pedestrian crossing and bus turning point.