Μετάφραση και ανάλυση λέξεων από την τεχνητή νοημοσύνη ChatGPT
Σε αυτήν τη σελίδα μπορείτε να λάβετε μια λεπτομερή ανάλυση μιας λέξης ή μιας φράσης, η οποία δημιουργήθηκε χρησιμοποιώντας το ChatGPT, την καλύτερη τεχνολογία τεχνητής νοημοσύνης μέχρι σήμερα:
- πώς χρησιμοποιείται η λέξη
- συχνότητα χρήσης
- χρησιμοποιείται πιο συχνά στον προφορικό ή γραπτό λόγο
- επιλογές μετάφρασης λέξεων
- παραδείγματα χρήσης (πολλές φράσεις με μετάφραση)
- ετυμολογία
vacuum gauge suction lift - translation to ρωσικά
строительное дело
вакуумметрическая высота всасывания
.jpg?width=200 "Airflow separating from a wing at a high angle of attack")
![Lift is defined as the component of the [[aerodynamic force]] that is perpendicular to the flow direction, and drag is the component that is parallel to the flow direction.](https://commons.wikimedia.org/wiki/Special:FilePath/Airfoil lift and drag.svg?width=200 "Lift is defined as the component of the [[aerodynamic force]] that is perpendicular to the flow direction, and drag is the component that is parallel to the flow direction.")
![streamlines]].](https://commons.wikimedia.org/wiki/Special:FilePath/Karman trefftz.gif?width=200 "streamlines]].")
![isobars]] of equal pressure along their length. The arrows show the pressure differential from high (red) to low (blue) and hence also the net force which causes the air to accelerate in that direction.](https://commons.wikimedia.org/wiki/Special:FilePath/Pressures-around-aerofoil.svg?width=200 "isobars]] of equal pressure along their length. The arrows show the pressure differential from high (red) to low (blue) and hence also the net force which causes the air to accelerate in that direction.")
общая лексика
пространственное течение
Ορισμός
Βικιπαίδεια
In fluid dynamics, total dynamic head (TDH) is the work to be done by a pump, per unit weight, per unit volume of fluid. TDH is expressed as the total equivalent height that a fluid is to be pumped, taking into account friction losses in the pipe.
- TDH = Static Lift + Pressure Head + Velocity Head + Friction Loss
where:
- Static lift is the difference in elevation between the suction point and the discharge point.
- Pressure head is the difference in pressure between the suction point and the discharge point, expressed as an equivalent height of fluid.
- Velocity head represents the kinetic energy of the fluid due to its bulk motion.
- Friction loss (or head loss) represents energy lost to friction as fluid flows through the pipe.
This equation can be derived from Bernoulli's Equation.
For incompressible liquids such as water, Static lift + Pressure head together equal the difference in fluid surface elevation between the suction basin and the discharge basin.
