Routing Information Protocol - significado y definición. Qué es Routing Information Protocol
Diclib.com
Diccionario ChatGPT
Ingrese una palabra o frase en cualquier idioma 👆
Idioma:

Traducción y análisis de palabras por inteligencia artificial ChatGPT

En esta página puede obtener un análisis detallado de una palabra o frase, producido utilizando la mejor tecnología de inteligencia artificial hasta la fecha:

  • cómo se usa la palabra
  • frecuencia de uso
  • se utiliza con más frecuencia en el habla oral o escrita
  • opciones de traducción
  • ejemplos de uso (varias frases con traducción)
  • etimología

Qué (quién) es Routing Information Protocol - definición

COMPUTER NETWORK PROTOCOL
RIP2; RIP1; Routing information protocol; BSD RIP; Comparing RIP v1 and v2; RIPv2; RIPv1; RIPng; RIPv6; Router Information Protocol; Routed daemon

Routing Information Protocol         
1. <networking> (RIP) A distance vector, as opposed to {link state}, routing protocol. RIP is an Internet standard Interior Gateway Protocol defined in STD 34, RFC 1058 and updated by RFC 1388. See also Open Shortest Path First. 2. <networking> (RIP) A companion protocol to IPX for exchange of routing information in a Novell network. RIP has been partly superseded by NLSP. It is not related to the Internet protocol of the same name. (1997-03-04)
Routing Information Protocol         
The Routing Information Protocol (RIP) is one of the oldest distance-vector routing protocols which employs the hop count as a routing metric. RIP prevents routing loops by implementing a limit on the number of hops allowed in a path from source to destination.
RIPNG         
Routing Information Protocol Next Generation (Reference: RIP, IPV6, RFC 2080), "Style: RIPng"

Wikipedia

Routing Information Protocol

The Routing Information Protocol (RIP) is one of the oldest distance-vector routing protocols which employs the hop count as a routing metric. RIP prevents routing loops by implementing a limit on the number of hops allowed in a path from source to destination. The largest number of hops allowed for RIP is 15, which limits the size of networks that RIP can support.

RIP implements the split horizon, route poisoning, and holddown mechanisms to prevent incorrect routing information from being propagated.

In RIPv1 routers broadcast updates with their routing table every 30 seconds. In the early deployments, routing tables were small enough that the traffic was not significant. As networks grew in size, however, it became evident there could be a massive traffic burst every 30 seconds, even if the routers had been initialized at random times.

In most networking environments, RIP is not the preferred choice of routing protocol, as its time to converge and scalability are poor compared to EIGRP, OSPF, or IS-IS. However, it is easy to configure, because RIP does not require any parameters, unlike other protocols.

RIP uses the User Datagram Protocol (UDP) as its transport protocol, and is assigned the reserved port number 520.