Single Edge Contact Cartridge - significado y definición. Qué es Single Edge Contact Cartridge
Diclib.com
Diccionario ChatGPT
Ingrese una palabra o frase en cualquier idioma 👆
Idioma:

Traducción y análisis de palabras por inteligencia artificial ChatGPT

En esta página puede obtener un análisis detallado de una palabra o frase, producido utilizando la mejor tecnología de inteligencia artificial hasta la fecha:

  • cómo se usa la palabra
  • frecuencia de uso
  • se utiliza con más frecuencia en el habla oral o escrita
  • opciones de traducción
  • ejemplos de uso (varias frases con traducción)
  • etimología

Qué (quién) es Single Edge Contact Cartridge - definición

Single Edge Contact Cartridge; Single Edge Processor Package
  • Celeron in SEPP: CPU at center (under heat spreader), surrounding chips are resistors and bypass capacitors
  • Slot 1/Socket 370 Converter
  • Slot 1/Socket 8 Converter
  • Pentium III (Katmai) in SECC2: CPU at center, two chips at right are cache
  • Pentium II SECC form installed into Slot 1
  • Intel Pentium II CPU in SECC form factor

Single Edge Contact Cartridge         
<hardware> (SEC, SECC) The cased daughterboard housing Intel's Pentium II, Pentium III, and Xeon microprocessors. A SECC fits into a Slot 1 or Slot 2 connector. [SECC 2?] (1999-08-05)
Slot 1         
<hardware, standard> The physical and electrical specification for the connector used by some of Intel's microprocessor cards, currently (August 1999) the SEPP Celeron and the SECC Pentium II. Slot 1 is a departure from the square ZIF PGA/SPGA sockets used by Pentium and earlier processors, the processor being mounted on a card, with a 242-lead edge-connector. The Slot 1 specification allows for higher bus rates than Socket 7. Slot 1 motherboards use the GTL+ {bus protocol}. See also Slot 2, Slot A. [bus rates?] (1999-08-04)
Single Edge Processor Package         
<hardware> (SEPP) The caseless daughterboard containing Intel's Celeron processor. A SEPP fits into a Slot 1 connector. (1999-08-04)

Wikipedia

Slot 1

Slot 1 refers to the physical and electrical specification for the connector used by some of Intel's microprocessors, including the Pentium Pro, Celeron, Pentium II and the Pentium III. Both single and dual processor configurations were implemented.

Intel reverted to the traditional socket interface with Socket 370 in 1999.