Diclib.com
Dizionario ChatGPT

Ricerca nel dizionario Soluzioni personalizzate

Inserisci una parola o una frase in qualsiasi lingua 👆

Lingua:

Traduzione e analisi delle parole tramite l'intelligenza artificiale ChatGPT

In questa pagina puoi ottenere un'analisi dettagliata di una parola o frase, prodotta utilizzando la migliore tecnologia di intelligenza artificiale fino ad oggi:

come viene usata la parola
frequenza di utilizzo
è usato più spesso nel discorso orale o scritto
opzioni di traduzione delle parole
esempi di utilizzo (varie frasi con traduzione)
etimologia

Cosa (chi) è scantling$72412$ - definizione

VERTICAL DISTANCE BETWEEN THE WATERLINE AND THE BOTTOM OF THE HULL (KEEL)

Draft (nautical); Draft (ship); Draught (hull); Drew (ship); Draught (ship); Trim (ship); Scantling draft; Draft mark; Draft (marine); Draught (boat); Ships draft; Draft marine; Ship draft; Ship draught; Ship hull draft; Deep draft; Trim (vessel); Draft limit

Scantling length

MEASUREMENT OF A VESSEL'S HULL LENGTH

Scantling Length is a distance slightly less than the waterline length of a ship, and generally less than the overall length of a ship.

https://en.wikipedia.org/wiki/Scantling_length

scantlings

MEASUREMENT OF PRESCRIBED SIZE, DIMENSIONS, OR CROSS SECTIONAL AREAS

Scantlings

a set of standard dimensions for parts of a structure, especially in shipbuilding.

Scantling

MEASUREMENT OF PRESCRIBED SIZE, DIMENSIONS, OR CROSS SECTIONAL AREAS

Scantlings

·adj Not plentiful; small; scanty.

II. Scantling ·vt A fragment; a bit; a little piece.

III. Scantling ·vt A frame for casks to lie upon; a trestle.

IV. Scantling ·vt A small quantity; a little bit; not much.

V. Scantling ·vt A rough draught; a rude sketch or outline.

VI. Scantling ·vt A piece or quantity cut for a special purpose; a sample.

VII. Scantling ·vt A piece of timber sawed or cut of a small size, as for studs, rails, ·etc.

VIII. Scantling ·vt The dimensions of a piece of timber with regard to its breadth and thickness; hence, the measure or dimensions of anything.

Wikipedia

Draft (hull)

The draft or draught of a ship's hull is the vertical distance between the waterline and the bottom of the hull (keel). The draught of the vessel is the maximum depth of any part of the vessel, including appendages such as rudders, propellers and drop keels if deployed. Draft determines the minimum depth of water a ship or boat can safely navigate. The related term air draft is the maximum height of any part of the vessel above the water.

The more heavily a vessel is loaded, the deeper it sinks into the water, and the greater its draft. After construction, the shipyard creates a table showing how much water the vessel displaces based on its draft and the density of the water (salt or fresh). The draft can also be used to determine the weight of cargo on board by calculating the total displacement of water, accounting for the content of the ship's bunkers, and using Archimedes' principle.

The closely related term "trim" is defined as the difference between the forward and aft drafts.

https://en.wikipedia.org/wiki/Draft (hull)