Перевод и анализ слов искусственным интеллектом ChatGPT
На этой странице Вы можете получить подробный анализ слова или словосочетания, произведенный с помощью лучшей на сегодняшний день технологии искусственного интеллекта:
- как употребляется слово
- частота употребления
- используется оно чаще в устной или письменной речи
- варианты перевода слова
- примеры употребления (несколько фраз с переводом)
- этимология
Что (кто) такое bearing flange - определение
![Wingqvist]] developed a self-aligning ball bearing.](https://commons.wikimedia.org/wiki/Special:FilePath/Wingquist bearing00.jpg?width=200 "Wingqvist]] developed a self-aligning ball bearing.")
![Flange-bearing frog (bottom, center) used in street railway trackage in [[Liberec]], [[Czech Republic]]. Note the polishing in the flangeway indicating contact with the wheel flange.](https://commons.wikimedia.org/wiki/Special:FilePath/Liberec, Tatranská, výhybka u vozovny.jpg?width=200 "Flange-bearing frog (bottom, center) used in street railway trackage in [[Liberec]], [[Czech Republic]]. Note the polishing in the flangeway indicating contact with the wheel flange.")
![railway wheel]]](https://commons.wikimedia.org/wiki/Special:FilePath/Flanged wheel.jpg?width=200 "railway wheel]]")
Википедия
A ball bearing is a type of rolling-element bearing that uses balls to maintain the separation between the bearing races.
The purpose of a ball bearing is to reduce rotational friction and support radial and axial loads. It achieves this by using at least two races to contain the balls and transmit the loads through the balls. In most applications, one race is stationary and the other is attached to the rotating assembly (e.g., a hub or shaft). As one of the bearing races rotates it causes the balls to rotate as well. Because the balls are rolling they have a much lower coefficient of friction than if two flat surfaces were sliding against each other.
Ball bearings tend to have lower load capacity for their size than other kinds of rolling-element bearings due to the smaller contact area between the balls and races. However, they can tolerate some misalignment of the inner and outer races.
