Введите слово или словосочетание на любом языке 👆
Язык:
Перевод и анализ слов искусственным интеллектом ChatGPT
На этой странице Вы можете получить подробный анализ слова или словосочетания, произведенный с помощью лучшей на сегодняшний день технологии искусственного интеллекта:
- как употребляется слово
- частота употребления
- используется оно чаще в устной или письменной речи
- варианты перевода слова
- примеры употребления (несколько фраз с переводом)
- этимология
Что (кто) такое change pole controller - определение
Full State Feedback; State feedback controller; Pole placement technique; Pole placement; Pole-placement
disk controller
CONTROLLER FOR DISK STORAGE, USUALLY INTEGRATED INTO THE DRIVE
Hard disk controller; Hard drive controller; HD controller; Drive controller
<hardware, storage> (Or "hard disk controller", HDC) The
circuit which allows the CPU to communicate with a {hard
disk}, floppy disk or other kind of disk drive.
The most common disk controllers in use are IDE and SCSI
controllers. Most home personal computers use IDE
controllers. High end PCs, workstations and network {file
servers} mostly have SCSI adaptors.
(1998-03-16)
Disk controller
CONTROLLER FOR DISK STORAGE, USUALLY INTEGRATED INTO THE DRIVE
Hard disk controller; Hard drive controller; HD controller; Drive controller
The disk controller is the controller circuit which enables the CPU to communicate with a hard disk, floppy disk or other kind of disk drive. It also provides an interface between the disk drive and the bus connecting it to the rest of the system.
Irrigation controller
DEVICE OPERATING AUTOMATIC IRRIGATION SYSTEMS
Controller (irrigation)
An irrigation controller is a device to operate automatic irrigation systems such as lawn sprinklers and drip irrigation systems. Most controllers have a means of setting the frequency of irrigation, the start time, and the duration of watering.
Википедия
Full state feedback
Full state feedback (FSF), or pole placement, is a method employed in feedback control system theory to place the closed-loop poles of a plant in pre-determined locations in the s-plane. Placing poles is desirable because the location of the poles corresponds directly to the eigenvalues of the system, which control the characteristics of the response of the system. The system must be considered controllable in order to implement this method.
