cut-throat razor - определение. Что такое cut-throat razor
Diclib.com
Словарь ChatGPT
Введите слово или словосочетание на любом языке 👆
Язык:

Перевод и анализ слов искусственным интеллектом ChatGPT

На этой странице Вы можете получить подробный анализ слова или словосочетания, произведенный с помощью лучшей на сегодняшний день технологии искусственного интеллекта:

  • как употребляется слово
  • частота употребления
  • используется оно чаще в устной или письменной речи
  • варианты перевода слова
  • примеры употребления (несколько фраз с переводом)
  • этимология

Что (кто) такое cut-throat razor - определение

KNIFE USED TO REMOVE BODY HAIR
Straight razors; Straight Razor; Cutthroat razor; Cut-throat razor; Straight-razor; Straight edge razor; Straightedge razor; Straight-edge razor; Barber's knife; Open razor; Shavette
  • order=flip}} blade and double transverse stabiliser
  • pages=119–126}}</ref>
  • Degrees of hollowness. From left: Extra hollow (singing blade), 1/1 Hollow, 1/2 Hollow, 1/4 Hollow, Concave Wedge, Linear Wedge
  • Blade geometry and hollowness. Blade A is less hollow than blade B, since blade A has more material than blade B. Visually, the belly of blade B is located higher than the belly of blade A, indicating a higher degree of hollowness. Profile C represents the extra-hollow ground blade. The wedge profile on the right is used as reference of zero hollowness.
  • French point with a spike end point at the toe
  • order=flip}} blade and single stabiliser in a three pin handle configuration. The middle pin adds stability and rigidity to the handle
  • Blade cross-section indicating hollow-ground blade geometry with different radii of curvature. The belly indicates the presence of a longitudinal stabiliser.
  • Swaty honing stone and razor blade. Swaty is considered one of the best whetstones.<ref name="Moler"/>
  • whetstone]].
  • Man being shaved with straight razor. Roadside, [[Kashgar]]
  • ''Fox and Rooster'' Thiers-Issard straight razor with two-pin handle
  • A straight razor with round point. Its high-gloss finish indicates metal plating usually associated with inferior quality.<ref name="Moler"/>
  • Antique leather barber's strop. It is best for sturdy wedge type blades. Hollow ground blades should be stropped on a hanging strop, since it provides a more flexible support for the blade.<ref name="Dovo Solingen"/>
  • Parts of a razor
  • Bronze razor with handle from Ancient Egypt during the  [[New Kingdom]] (1569 — 1081 BC)
  • During stropping, the strop hangs from the ring and is pulled from the rectangular loop giving it a proper tension
  • Straight razor blank produced by forging welded steel wire. The wire strands are visible on the right while the blank blade and its shank, shoulder, heel, and spine are shown on the left.<ref name="Moler"/>
  • Four of the main blade point (nose) profile shapes: Square, Barber's notch, Round, and French (with a round end point at the toe)<ref name="Moler"/>
  • Shavette
  • Spanish point with the characteristic twin spike points at the head and toe of the blade.
  • order=flip}}, 1/2 hollow-ground, stainless steel blade
  • DOVO straight razor
  • Four common width sizes of blades.<ref name="Moler"/>
  • horn]] handle. The blade is made of Sheffield [[silver steel]].
  • Thiers Issard ''Le Thiernois'' Sheffield silver steel, mirror-finished, singing, 5/8 inch blade, fully hollow ground, round-nose razor with decorated 24k gold-inlaid blade, fluted shank, double stabiliser, and double-pin, blonde horn scales

cut-throat razor         
¦ noun Brit. a razor with a long blade which folds like a penknife.
Straight razor         
A straight razor is a razor with a blade that can fold into its handle. They are also called open razors and cut-throat razors.
straight razor         
¦ noun North American term for cut-throat razor.

Википедия

Straight razor

A straight razor is a razor with a blade that can fold into its handle. They are also called open razors and cut-throat razors. The predecessors of the modern straight razors include bronze razors, with cutting edges and fixed handles, produced by craftsmen from Ancient Egypt during the New Kingdom (1569 — 1081 BC). Solid gold and copper razors were also found in Ancient Egyptian tombs dating back to the 4th millennium BC.

The first steel-edged cutthroat razors were manufactured in Sheffield in 1680. By the late 1680s, early 1690s, razors with silver-covered handles along with other Sheffield-made products known as "Sheffield wares" were being exported to ports in the Gulf of Finland, approximately 1200 miles (1931km) from Sheffield. From there, these goods were probably sent to Finland and even Russia. By 1740, Benjamin Huntsman was making straight razors complete with decorated handles and hollow-ground blades made from cast steel, using a process he invented. Huntsman's process was adopted by the French sometime later, albeit reluctantly at first due to nationalist considerations. In England, razor manufacturers were even more reluctant than the French to adopt Huntsman's steel-making process and only did so after they saw its success in France.

After their introduction in 1680, straight razors became the principal method of manual shaving for more than two hundred years, and remained in common use until the mid-20th century. Straight razor production eventually fell behind that of the safety razor, which was introduced in the late 19th century and featured a disposable blade. Electric razors have also reduced the market share of the straight razors, especially since the 1950s. A 1979 comparative study of straight and electric razors, performed by Dutch researchers, found that straight razors shave hair approximately 0.002 in. (0.05mm) shorter than electrics.

Since 2012, production of straight razors has increased multifold. Straight razor sales are increasing globally and manufacturers have difficulty satisfying demand. Sales started increasing since the product was featured in the 2012 James Bond film Skyfall and have remained high since. Straight razors are also perceived as a better value and a more sustainable and efficient product. Dovo in Germany reports that since a production low of less than 8,000 units per year in 2006, the company sells 3,000 units per month, and has 110,000 orders with production lead time of three years. The increased sales have also led to an increase in the number of associated trades and artisans such as bladesmiths, leather craftsmen, and potters.

Forums and outlets provide products, directions, and advice to straight razor users. Straight razor manufacturers exist in Europe, Asia, and North America. Antique straight razors are also actively traded. Straight razors require considerable skill to hone and strop, and require more care during shaving. Straight razor design and use was once a major portion of the curriculum in barber colleges.

Примеры употребления для cut-throat razor
1. His team–mate Cesinha pulled out a cut–throat razor and slit the throats of several others.
2. His final model featured four curved steel blades – each as sharp as a cut–throat razor – that were attached to a welded brass amulet.
3. Women have the option of waxing strips, but until they come up with waxing strips for the male face – presumably a breakthrough beyond imagination for most men – the next best option is the "straight razor", better know as the cut–throat razor.