Diclib.com
Словарь ChatGPT

Поиск в словаре Индивидуальные решения

Введите слово или словосочетание на любом языке 👆

Язык:

Перевод и анализ слов искусственным интеллектом ChatGPT

На этой странице Вы можете получить подробный анализ слова или словосочетания, произведенный с помощью лучшей на сегодняшний день технологии искусственного интеллекта:

как употребляется слово
частота употребления
используется оно чаще в устной или письменной речи
варианты перевода слова
примеры употребления (несколько фраз с переводом)
этимология

Что (кто) такое inspection cycle - определение

Automated Optical Inspection; Automated inspection

Pipeline video inspection

Pipeline video inspection is a form of telepresence used to visually inspect the interiors of pipelines, plumbing systems, and storm drains. A common application is for a plumber to determine the condition of small diameter sewer lines and household connection drain pipes.

https://en.wikipedia.org/wiki/Pipeline_video_inspection

Otto cycle

THERMODYNAMIC CYCLE FOR SPARK IGNITION PISTON ENGINES

Otto Cycle; Otto-cycle; Otto cycle engine

An Otto cycle is an idealized thermodynamic cycle that describes the functioning of a typical spark ignition piston engine. It is the thermodynamic cycle most commonly found in automobile engines.

https://en.wikipedia.org/wiki/Otto_cycle

Gartner hype cycle

GRAPHICAL PRESENTATION OF THE MATURITY OF SPECIFIC TECHNOLOGIES

Technology hype; Hype (information technology); Hypeware; Gartner's Hype Cycle; Hype Cycle; Gartner Hype Cycle; Hype cycle

The Gartner hype cycle is a graphical presentation developed, used and branded by the American research, advisory and information technology firm Gartner to represent the maturity, adoption, and social application of specific technologies. The hype cycle claims to provide a graphical and conceptual presentation of the maturity of emerging technologies through five phases.

https://en.wikipedia.org/wiki/Gartner_hype_cycle

Википедия

Automated optical inspection

Automated optical inspection (AOI) is an automated visual inspection of printed circuit board (PCB) (or LCD, transistor) manufacture where a camera autonomously scans the device under test for both catastrophic failure (e.g. missing component) and quality defects (e.g. fillet size or shape or component skew). It is commonly used in the manufacturing process because it is a non-contact test method. It is implemented at many stages through the manufacturing process including bare board inspection, solder paste inspection (SPI), pre-reflow and post-re-flow as well as other stages.

Historically, the primary place for AOI systems has been after solder re-flow or "post-production." Mainly because, post-re-flow AOI systems can inspect for most types of defects (component placement, solder shorts, missing solder, etc.) at one place in the line with one single system. In this way the faulty boards are reworked and the other boards are sent to the next process stage.

https://en.wikipedia.org/wiki/Automated optical inspection

Примеры употребления для inspection cycle

1. The directive, which the FAA estimates will cost U.S. operators $214,400 per inspection cycle, resulted from reports of cracked overwing frames.

2. The Early Years: Safe and Sound report also revealed how the proportion of nurseries and childminders judged to be failing leapt one per cent during the last inspection cycle to four per cent between April last year and March.

3. And she said the proportion of outfits being told to improve or face closure for failing to meet one or more of the national standards had dropped from 22 per cent during the last inspection cycle to just four per cent.

4. "We will continue to monitor inadequate childcare providers closely and take enforcement action where necessary to ensure that all children are kept safe." But she added: "Parents can be confident that the vast majority of childcare providers are meeting the national standards and providing good quality care and a safe and healthy environment for their children." Ofsted said the proportion of settings failing to meet one or more of the national standards had dropped from 22 per cent during the last inspection cycle to just four per cent.