jumper$2$ - перевод на французский
Diclib.com
Словарь ChatGPT
Введите слово или словосочетание на любом языке 👆
Язык:     

Перевод и анализ слов искусственным интеллектом ChatGPT

На этой странице Вы можете получить подробный анализ слова или словосочетания, произведенный с помощью лучшей на сегодняшний день технологии искусственного интеллекта:

  • как употребляется слово
  • частота употребления
  • используется оно чаще в устной или письменной речи
  • варианты перевода слова
  • примеры употребления (несколько фраз с переводом)
  • этимология

jumper$2$ - перевод на французский

SHORT LENGTH OF CONDUCTOR USED TO CLOSE, OPEN OR BYPASS PART OF AN ELECTRONIC CIRCUIT
Jumper block; Little blue jumper; Little black jumper; Jumperless; Jumpered; Jumper Block; Strapping option; Shunt jumper; Shunting jumper; Jumper shunt; 2-pin jumper; 3-pin jumper; 1x3 jumper pad; 1x2 jumper pad; 1×3 jumper pad; 1×2 jumper pad; 1x3 jumper; 1x2 jumper; 1×3 jumper; 1×2 jumper; Open jumper; Closed jumper; Jumper pad; Solder jumper; 1-way jumper; 2-way jumper; 3-way jumper; 4-way jumper; Wire bridge; Solder bridge jumper; Closed solder jumper; Normally closed solder jumper; Open solder jumper; 4-pin jumper; 5-pin jumper; Strap option; Strapping option pin; Strap pin; Pin strapping; Strap function; Jumper socket; Open shunt; Pin strap; Configuration strap; Pin strap option; Strap value; Strapping pin; Strap output; Strap-configurable; Strap configuration
  • Different types and colors of jumpers, with a couple of jumper pins for scale.
  • Red jumper on a [[pin header]]

jumper      
jump, leap, spring

Определение

jumper cables
Jumper cables are the same as jump leads
. (AM)
N-PLURAL

Википедия

Jumper (computing)

In electronics and particularly computing, a jumper is a short length of conductor used to close, open or bypass part of an electronic circuit. They are typically used to set up or configure printed circuit boards, such as the motherboards of computers. The process of setting a jumper is often called strapping.

A strapping option is a hardware configuration setting usually sensed only during power-up or bootstrapping of a device (or even a single chip).